What does Tesla require for an electrician to be listed on Teslas website?
Load Calculations. Both the NEMA 14-50 outlet and Tesla Wall Connector will add a significant load on the electrical system of a home. A load calculation is the mathematical proof that a home can support the additional demand of charging equipment.
Permits and inspection to ensure a code compliant installation. Most building departments require a load calculation for the permit.
Install with copper wire. Copper wire is the highest quality wire to use, and will ensure a reliable charging experience.
Note: Permits, inspections and load calculations do increase the total scope of work for an installation, resulting in slightly higher estimates compared to cut-rate electricians. Hire a professional electrician who can ensure due diligence with these requirements.
Why is a permit and inspection necessary?
In almost every jurisdiction, the modification to the electrical panel of a home will require a permit and inspection from your local building department. These requirements are designed to ensure safe and code compliant electrical installations for both yourself and your neighbors. The permit will also make local utilities aware of growing electric vehicle ownership in the area, allowing ample time to plan ahead for any infrastructure upgrades for the community. Be aware, most home owner insurance policies require any modifications to the electric panel of a home be permitted and inspected.
When should I install home charging?
We recommend installing home charging shortly after ordering your Tesla vehicle. Some installations, such as detached garages or electrical system upgrades, will require longer lead times. Installing the electrical equipment ahead of time will ensure you are prepared to charge at home when taking delivery of your vehicle.
How much does it cost to install charging equipment?
Every installation is custom to the home, cost will vary depending on the scope of work. An electrician will need to review your home to provide an accurate estimate. Distance is an important factor; an installation which is 100 feet away from the electrical panel will be more expensive than an installation 10 feet away. Some homes may need a utility upgrade; however this is less common for 50 amp circuit installations. Plan ahead if you have a more complicated installation, such as trenching to a detached garage. Cost can range from $500 to $5,000 (or more) depending on the scope of work. The average NEMA 14-50 installation is between $1,000-$2,000, however it’s important to note that every installation is custom to the home. Have an electrician review your home to receive a formal estimate.